# DYG's ... continues
**URL:** https://discourse.midwestaudio.club/t/dygs-continues/47
**Category:** DIY
**Tags:** inlays, passive-xover, 3-way, baffle-facets, floorstander, ported-box, jigs, woodworking
**Created:** [September 7, 2025, 1:54pm UTC](https://discourse.midwestaudio.club/t/dygs-continues/47 "2025-09-07T13:54:27Z")
**Posts on this page:** 20
**Page:** 2
### Author:  [@Dynamo](https://discourse.midwestaudio.club/u/Dynamo)
#### Post date: [December 8, 2025, 1:19pm UTC](https://discourse.midwestaudio.club/t/dygs-continues/47/21 "2025-12-08T13:19:33Z")
Everything about those is absolutely fantastic! You, sir, do good work!
---
### Author:  [@6thplanet](https://discourse.midwestaudio.club/u/6thplanet)
#### Post date: [December 8, 2025, 5:55pm UTC](https://discourse.midwestaudio.club/t/dygs-continues/47/22 "2025-12-08T17:55:08Z")
First time cut/buff. Definitely should have followed what I researched, but stopped at 1000 grit before going with stage 1 of the 3 stage 3M purple compound system. It got glossy, but still had some fine scratches.
Going back to try again finishing out sanding to 3000 before compounds.
---
### Author:  [@a4eaudio](https://discourse.midwestaudio.club/u/a4eaudio)
#### Post date: [December 8, 2025, 6:13pm UTC](https://discourse.midwestaudio.club/t/dygs-continues/47/23 "2025-12-08T18:13:55Z")
You probably have it all figured out…but I like this stuff for 3000 and 5000 grit.
> **[Amazon.com: 3M Performance 3000 Grit Sandpaper, 3-2/3 in x 9 in, Polish Clear...](https://www.amazon.com/3M-03064-Trizact-Performance-Sandpaper/dp/B005RNGL9O)**
>
> Scotch Delicate Surface Painter’s Tape is great for surfaces that require a little extra care such as wood floors, wallpaper, cabinets, painted drywall, and freshly painted walls\* (\*painted at least 24 hours ago). This delicate surface tape with...
---
### Author:  [@Wolf](https://discourse.midwestaudio.club/u/Wolf)
#### Post date: [December 8, 2025, 11:17pm UTC](https://discourse.midwestaudio.club/t/dygs-continues/47/24 "2025-12-08T23:17:10Z")
Harbor Freight has high grits for orbital sander. Meant for wetsanding metal, but worked really well when I wet upsanded my VersaBox cabs.
---
### Author:  [@Analogkid455](https://discourse.midwestaudio.club/u/Analogkid455)
#### Post date: [December 9, 2025, 2:05am UTC](https://discourse.midwestaudio.club/t/dygs-continues/47/25 "2025-12-09T02:05:46Z")
If you want high gloss you need to work it from 1000 and go to 7000. For paint it doesn’t have to be that crazy. 2000 and then compound with a good buffer. After that a light compound with a foam pad.
---
### Author:  [@6thplanet](https://discourse.midwestaudio.club/u/6thplanet)
#### Post date: [December 11, 2025, 11:31am UTC](https://discourse.midwestaudio.club/t/dygs-continues/47/26 "2025-12-11T11:31:09Z")
Second round of cut and buff done. Still not “perfect”, but definitely better. Not sure if maybe I didn’t spend enough time with the 1200 or what. The thing is, you really can’t tell until you get up into the polishing compounds. Honestly at this point I’m being picky, it’ll be fine for all intents and purposes.
---
### Author:  [@6thplanet](https://discourse.midwestaudio.club/u/6thplanet)
#### Post date: [December 16, 2025, 1:33am UTC](https://discourse.midwestaudio.club/t/dygs-continues/47/27 "2025-12-16T01:33:06Z")
One baffle attached, one drying…
Stealing the CSS boys process. Loctite PL Roof& Flashing sealant and neoprene foam gasket material (1/16" thick X 1/2" wide)
---
### Author:  [@6thplanet](https://discourse.midwestaudio.club/u/6thplanet)
#### Post date: [December 25, 2025, 12:00am UTC](https://discourse.midwestaudio.club/t/dygs-continues/47/28 "2025-12-25T00:00:16Z")
Drivers are in, running impedance sweeps, all seems good. Hit the woofers with some bassy tracks. 😎
---
### Author:  [@Nicholas-23](https://discourse.midwestaudio.club/u/Nicholas-23)
#### Post date: [December 25, 2025, 12:44am UTC](https://discourse.midwestaudio.club/t/dygs-continues/47/29 "2025-12-25T00:44:09Z")
Mustve missed it in the thread , thought you were going to run the aerogel in the lower?
---
### Author:  [@6thplanet](https://discourse.midwestaudio.club/u/6thplanet)
#### Post date: [December 25, 2025, 12:47am UTC](https://discourse.midwestaudio.club/t/dygs-continues/47/30 "2025-12-25T00:47:23Z")
I was, but these are an experiment. The surrounds are just to stiff on the ol girls. Have to try new things.
---
### Author:  [@Analogkid455](https://discourse.midwestaudio.club/u/Analogkid455)
#### Post date: [December 25, 2025, 11:44pm UTC](https://discourse.midwestaudio.club/t/dygs-continues/47/31 "2025-12-25T23:44:55Z")
Love the way they look. Turned out really nice!
---
### Author:  [@6thplanet](https://discourse.midwestaudio.club/u/6thplanet)
#### Post date: [December 31, 2025, 10:52pm UTC](https://discourse.midwestaudio.club/t/dygs-continues/47/32 "2025-12-31T22:52:59Z")
Moved everything to the living room, 12’+ vaulted ceiling. 👍🏻
Fancy smancy turn table…
---
### Author:  [@6thplanet](https://discourse.midwestaudio.club/u/6thplanet)
#### Post date: [January 4, 2026, 8:08pm UTC](https://discourse.midwestaudio.club/t/dygs-continues/47/33 "2026-01-04T20:08:17Z")
It’s play time!!
So far Vitux is in close agreement with Omnimic measurements. The low end is the most off, to be expected in room. Otherwise starting to sound proper.
---
### Author:  [@LingGowa](https://discourse.midwestaudio.club/u/LingGowa)
#### Post date: [January 10, 2026, 7:11pm UTC](https://discourse.midwestaudio.club/t/dygs-continues/47/34 "2026-01-10T19:11:52Z")
Those are sick! Nice job.
---
### Author:  [@6thplanet](https://discourse.midwestaudio.club/u/6thplanet)
#### Post date: [January 12, 2026, 1:01am UTC](https://discourse.midwestaudio.club/t/dygs-continues/47/35 "2026-01-12T01:01:17Z")
I’ve been listening in stereo now since Friday…
I didn’t change anything from the mono version and I’m honestly amazed. Of course this has me listening to all my normal tracks and has already inspired me to make a demo for the upcoming InDIYana meet.
I do have parts on order for a couple impedance notches for the mid and woofer. I think the crossing point can be a little better, but so far so good.
---
### Author:  [@Eggguy](https://discourse.midwestaudio.club/u/Eggguy)
#### Post date: [January 15, 2026, 10:52am UTC](https://discourse.midwestaudio.club/t/dygs-continues/47/36 "2026-01-15T10:52:34Z")
Would you be willing to share your schematic and six pack if using VCad?
---
### Author:  [@6thplanet](https://discourse.midwestaudio.club/u/6thplanet)
#### Post date: [January 16, 2026, 2:07am UTC](https://discourse.midwestaudio.club/t/dygs-continues/47/37 "2026-01-16T02:07:15Z")
ViCAD…
Measured with Omnimic…
That’s in room of course.
---
### Author:  [@Ed\_Perkins](https://discourse.midwestaudio.club/u/Ed_Perkins)
#### Post date: [January 17, 2026, 2:16pm UTC](https://discourse.midwestaudio.club/t/dygs-continues/47/38 "2026-01-17T14:16:08Z")
That’s an interesting network on the Audax mid. How did you come up with that configuration (the 0.7 mH branch feeding forward/around) ?
---
### Author:  [@DrewsBrews](https://discourse.midwestaudio.club/u/DrewsBrews)
#### Post date: [January 17, 2026, 3:32pm UTC](https://discourse.midwestaudio.club/t/dygs-continues/47/39 "2026-01-17T15:32:21Z")
When compressed down the circuit looks realy weird at first. Took me a bit of time to wrap my head around.
I’m seeing 1st order highpass with the 50uf, and 2nd order lowpass with the .7mH and 6.8uF. Looks like the .47uF + 20Ω is a tank on that .7mH. You can see the valley it creates at 10khz in the filter output. The big values on the parallel RLC I bet are supressing the resonance peak. Finally, series and parallel padding resistors mixed in (12Ω, 10Ω).
---
### Author:  [@6thplanet](https://discourse.midwestaudio.club/u/6thplanet)
#### Post date: [January 17, 2026, 5:17pm UTC](https://discourse.midwestaudio.club/t/dygs-continues/47/40 "2026-01-17T17:17:19Z")
What Drew said.
[Previous page](https://discourse.midwestaudio.club/t/dygs-continues/47.md?page=1)
[Next page](https://discourse.midwestaudio.club/t/dygs-continues/47.md?page=3)