# Mallobrezzy - An adaptation of a DaveFred design

**URL:** <https://discourse.midwestaudio.club/t/mallobrezzy-an-adaptation-of-a-davefred-design/889>\
**Category:** DIY\
**Created:** [November 17, 2026, 4:22pm UTC](https://discourse.midwestaudio.club/t/mallobrezzy-an-adaptation-of-a-davefred-design/889 "2026-11-17T16:22:04Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![silverD](https://discourse.midwestaudio.club/user_avatar/discourse.midwestaudio.club/silverd/32/130_2.png) [@silverD](https://discourse.midwestaudio.club/u/silverD)\
**Post date:** [November 17, 2026, 4:22pm UTC](https://discourse.midwestaudio.club/t/mallobrezzy-an-adaptation-of-a-davefred-design/889/1 "2026-11-17T16:22:04Z")

</div>

I wanted to do quick build with drivers I had on hand that utilized a waveguide. The speakers were destined to either be a in secondary listening location or gifted to friends, so a passive design was needed. Having plenty of RS225-8 on hand (remember the PE sale?), I went in search of a waveguided two-way. I ran across @DaveFred 's beautiful Vellabrezzy build, but it didn’t meet the criteria as I don’t own any Scan-Speak tweeters let alone the unobtanium Monacor waveguide. After reading his build thread closer, I realized I did have the needed tweeter…Scan-Speak XT25BG60 😉. Now to solve the waveguide issue. The WG-300 is 37.5mm deep and looking into the Augerpro waveguides, I found the R2904 8" waveguide is 38.1mm deep. Close enough to not require a crossover change?..let’s hope not. Will the different WG profiles create a response issue?..that I can detect? 🤷 I printed the guides and trudged on. I CNC’d the baffle from a 1-1/8" stair tread and I sliced up some menards valve shelves. I made sure to maintain the same driver center to center as well as a similar cabinet volume and tuning.

 ![image](https://discourse.midwestaudio.club/uploads/default/original/2X/0/09df533215527a03bc70e633e5a5c3ae2411d9c2.png)

I used the [Optimal Port Designer](https://freespeakertools.com/port-optimizer/)which I’ve used it a few times now (it’s awesome) and picked up the [needed crossover parts](https://www.jfcomponents.com/) from @Hifiside. After a bit of gluing, flush trimming, and painting using leftover exterior house paint with some silica sand added, the speakers were complete.

I present the much less visually appealing Mallobrezzy.

 ![PXL_20261018_225309527](https://discourse.midwestaudio.club/uploads/default/original/2X/1/1c111973c533dbbdb6be097b7001974971fbadf9.jpeg)

 ![PXL_20261117_054535441](https://discourse.midwestaudio.club/uploads/default/original/2X/9/9b4a2567f5c2dbe79216e22816b13fc5404c62b2.jpeg)

 ![PXL_20261117_054137289](https://discourse.midwestaudio.club/uploads/default/original/2X/9/95941b7314b91f8c6ed8f70bf7bbc122a0e0eecb.jpeg)

---

<div class="post-metadata">

**Author:** ![6thplanet](https://discourse.midwestaudio.club/user_avatar/discourse.midwestaudio.club/6thplanet/32/44_2.png) [@6thplanet](https://discourse.midwestaudio.club/u/6thplanet)\
**Post date:** [November 17, 2026, 5:18pm UTC](https://discourse.midwestaudio.club/t/mallobrezzy-an-adaptation-of-a-davefred-design/889/2 "2026-11-17T17:18:07Z")

</div>

That’s fantastic​👍🏼

---

<div class="post-metadata">

**Author:** ![Ed\_Perkins](https://discourse.midwestaudio.club/letter_avatar_proxy/v4/letter/e/df788c/32.png) [@Ed\_Perkins](https://discourse.midwestaudio.club/u/Ed_Perkins)\
**Post date:** [November 17, 2026, 5:26pm UTC](https://discourse.midwestaudio.club/t/mallobrezzy-an-adaptation-of-a-davefred-design/889/3 "2026-11-17T17:26:57Z")

</div>

Great job! For others looking at designs that use the NLA Monacor waveguide: Heissmann Acoustics has a waveguide that I believe is a direct Monacor replacement: [LINK](https://heissmann-acoustics.de/produkt/waveguide-ha-wg-169/). It’s not cheap (33 Euros each) and I’m not sure how much shipping would cost. But it does come with a tweeter adapter. Here’s the list of supported tweeters:

Peerless Tymphany: XT25TG30-04, XT25BG60-04, DX25TG09-04, DX25BG60-04

Scan Speak Discovery: D2604/833000, D2604/830000, R2604/832000, R2604/833000

Vifa: XT-300, XD-270

---

<div class="post-metadata">

**Author:** ![DaveFred](https://discourse.midwestaudio.club/letter_avatar_proxy/v4/letter/d/838e76/32.png) [@DaveFred](https://discourse.midwestaudio.club/u/DaveFred)\
**Post date:** [November 18, 2026, 3:55am UTC](https://discourse.midwestaudio.club/t/mallobrezzy-an-adaptation-of-a-davefred-design/889/4 "2026-11-18T03:55:03Z")

</div>

Did you use my exact XO?

And what do you think?

Take care,

David.

---

<div class="post-metadata">

**Author:** ![silverD](https://discourse.midwestaudio.club/user_avatar/discourse.midwestaudio.club/silverd/32/130_2.png) [@silverD](https://discourse.midwestaudio.club/u/silverD)\
**Post date:** [November 18, 2026, 4:40am UTC](https://discourse.midwestaudio.club/t/mallobrezzy-an-adaptation-of-a-davefred-design/889/5 "2026-11-18T04:40:46Z")

</div>

Hi David,

Yes, I tried to get component valves as close as I could. I did a quick FR measurement on the first one I completed which showed a smooth response. In the few hours of listening done in a less than ideal room…they sound great!

---

<div class="post-metadata">

**Author:** ![waffleduck](https://discourse.midwestaudio.club/user_avatar/discourse.midwestaudio.club/waffleduck/32/5561_2.png) [@waffleduck](https://discourse.midwestaudio.club/u/waffleduck)\
**Post date:** [November 18, 2026, 6:51am UTC](https://discourse.midwestaudio.club/t/mallobrezzy-an-adaptation-of-a-davefred-design/889/6 "2026-11-18T06:51:47Z")

</div>

I quite like the somewhat industrial, stout look of those! I built something similar, just a smaller version. With the RS180P-4, DX25 in a Visaton waveguide. Also in black; it could be your speakers little sibling!

 ![PXL_20241030_210522343](https://discourse.midwestaudio.club/uploads/default/original/2X/a/a41aaa9c4c6ee7700345086cec4dbc6e30373f38.jpeg)

---

<div class="post-metadata">

**Author:** ![silverD](https://discourse.midwestaudio.club/user_avatar/discourse.midwestaudio.club/silverd/32/130_2.png) [@silverD](https://discourse.midwestaudio.club/u/silverD)\
**Post date:** [November 18, 2026, 2:53pm UTC](https://discourse.midwestaudio.club/t/mallobrezzy-an-adaptation-of-a-davefred-design/889/7 "2026-11-18T14:53:43Z")

</div>

This can really be an inexpensive build if you have/can get a deal on the RS225-8:

2 x XT25BG60: $70

Crossover parts: $40

3D printed waveguides and ports: $15

8 x value shelves: $25

= $150 + BYOW RS225-8
