I Built some speakers and I was in the 2026 Dayton Audio Speakers Building Competition. I would like to attend the Iowa Diy gathering in October. I would like to bring my system and maybe someone can help me make it better. I had passive crossover in the competition. When I bring it to Iowa I am changing it to DSP. See if I set it up ok.
Hello Dee’s!
Hi how are you. I want to bring my speakers to Iowa Diy if they are having one this year
What was your speakers name
I was sitting behind you to your right with my wife before you did youre presentation.
My name is David, and I had the small Purifi and SB Acoustic WG speaker in the over $300 small category.
Iowa is too far for me, someone much closer to the event and actually has something to do with it will respond shortly I am sure.
Welcome, jabmuh54! I hope to meet you in October. I think you’ll find the Iowa event is pretty relaxed. The main event is during the day on Saturday. There’s always lots of fun on Friday & Saturday nights - like trying to blow up a budget pro-sound amp that Brad brought one year. ![]()
Welcome to the forum, Jabbar! I really liked the overall sound character of the speakers that you brought to the competition. A very unique and interesting design. With all the drivers spread out like that in separate boxes, the soundstage at my listening position was very expansive and enveloping, even though I was way off to the side of the room.
Here is the location. For more information see the “IowaDIY 2026” thread.
Thanks for the compliment I really appreciate it. Can you tell me about the itinerary for October the two days?Or how can I find out. I was told I will get a chance to play my system. I am changing my crossovers to DSP.
You will have to ask JR as to the specific schedule for this year. But generally, in past years, people usually get to the hotel around noon or a little later on Friday. I usually get there around 3pm or so. Unloading and setting up speakers in the conference room generally takes place throughout the afternoon and evening on Friday. Some builders show up on Saturday morning and set up their speakers up then. During the day on Saturday, everyone gets to play their speakers: 5 minutes playing the house tracks and then another 5 minutes playing their personal demo tracks. Playback on Friday and Saturday evening, however, is somewhat informal.
Adding to what 4thtry said above^
Unlike Parts Express Speaker Design Competition, which is a competition with judges, prizes, etc. the other DIY get togethers are just casual affairs where people get together and talk, hang out, and listen to speakers.
Welcome in Jabbar. I had my doubts about your project in the speaker design competition but I was surprised how well everything worked, and I didn’t hate the sound even though the system seemed to “break all the rules”. This demo led to some thoughts about what causes a listener to hear a good wide soundstage in a room, with the wider source spacing you used as frequency increased.
Welcome, jabmuh54
Anyone here remember the ‘Cogent Simultaneous Polyphonic Isolator’ ?
Basically ‘un-mixes / isolates’ 4 channels from a 2 channel source. "Neatest black box of the '92 CES show- Ken Kessler, Hi-Fi News and Record Review.
Interesting. I had never heard of that device before. I am curious if it does electronically what the old Polk SDA series speakers did acoustically - send some of the left channel right and vice versa?
Click on the blue this is it
My limited understanding based upon reading the owner’s manual was more of a right-left dual combination/ subtraction to obtain 4 front channels (Haffler-ish), panning the left into two left channels and the right into two right channels. Thinking accomplished by isolating out the center image (derived from the stereo channels) out of the far left and far right and a more focused center source in the inner two channels.
My understanding is that it can be configured all four can be on one channel and add a second board in cascade mode and that four can be on a second channel and you can configure one of those can be a subwoofer
Four channels of ampl. for subs and another four for the rest of the spectrum? Sounds about right but I do not know anything about I2S connections.
According to the manual: “each KABD4100 can be configured in 4.0, 2.1, or 2.0 mode”. If you could parallel all four channels it would be 0.1 mode. In 2.0 mode you could drive two subs.

